Description
Premium Light Filtering Sheer Shades are beautifully elegant, light and airy. These sheer shades combine the light and privacy control of a horizontal blind with the soft look of a fabric shade. Floating vanes are suspended between graceful sheer fabric and provide you with control over privacy and light. The vanes smoothly rotate like slats on a blind, permitting a wide range of light control. These shades are available in 21 designer colours.
Features
- Hardware colours will be matched to fabric accordingly. They are: White, Black, Espresso, Alabaster, and Anodized Aluminum
- Colour-coordinated fabric-insert cassette.
Options
- Motorized lift system
- Motorized Wand
- Continuous Cord Loop - Chain Guard System
Recommendations and Limitations
- For all mounting types, the shade will measure the length ordered when the vanes are in the open or “view-through” position.
- The vanes overlap each other when closed, blocking the view.
- Fabric telescoping may occur on shades with a height-to-width ratio greater than 3:1 (height is more than 3 times the width). Telescoping blinds may cause your shades to roll unevenly or fray your fabric.
- 2 blinds on 1 headrail is required over 84 inch width for Motorization.
- 2 blinds on 1 headrail is required over 84 inch for Wand Lift.
- Please note; there is minimal contact amongst the vanes along the full length of the shading and thus there is not a full seal against light leakage (most visible toward the bottom of the shading).
- Inside mount: Fabric will measure ordered width less 1 3/8". Cassette will measure 1/4" less than ordered width. Do not attempt to account for fabric deductions by changing measurements on inside mount shades.
- Outside mount: Fabric will measure ordered width less 1 1/8". Cassette will measure ordered width. Do not attempt to account for fabric deductions by changing measurements on outside mount shades.
- Minimum depth for side mount: 1 1/2".
- Maximum shade width for side mount: 48".
- Side mount: Fabric will measure ordered width less 1 1/8". Cassette will measure ordered width less 1/4". Total height will measure ordered height less 1/4". Do not attempt to account for fabric deductions by changing measurements on side mount shades.
- Light Gap: Clutch: 5/8" Idle End: 1/2”.
- Chain guard shroud is transparent
- Chain guard length is based on the height of the shade ordered:
Length of Shade |
Length of Chain Guard |
---|---|
0-36" |
18" |
36"-48" |
24" |
48"-72" |
36" |
72"-96" |
48" |
96"-120" |
60" |
120"-144" |
72" |
Specifications and Installation | |
---|---|
Width |
|
Height |
|
Min inside-mount depth |
|
Min outside-mount space |
|
Headrail Dimensions |
|
WARNING
STRANGULATION HAZARD — Young children can be strangled by cords. Immediately remove this product if a cord longer than 22 cm or a loop exceeding 44 cm around becomes accessible.
Customer Photos
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes
Would you recommend this site to a friend? Yes