Blinds and shades parts
Your blinds and shades have unique parts and mechanisms depending on which type of window covering you have. SelectBlinds Canada does not sell individual parts. Thus, this page is for educational purposes only.
Horizontal Blind Parts | Vertical Blind Parts | Honeycomb Shade Parts | Roller Shade Parts | Bamboo Shade Parts
Horizontal Blinds
Mounting bracket
Horizontal blind mounting brackets are easily installed on the wall via the side holes or the ceiling via the top holes. These brackets are the same for inside or outside mounts. One side is hinged for easy blind installation.
1" Horizontal window treatment mounting bracket
View 1
View 2
Extension bracket
These brackets allow outside mounted blinds and shades to be extended further away from the wall.
View 1
View 2
Hold down bracket
Mount hold down brackets to walls or doors to secure the bottom of your blind or shade.
View 1
View 2
Lift cord mechanism
The lift cord mechanism adjusts the height of your horizontal blinds, and is found inside the headrail.
View 1
View 2
Center support bracket
A center support bracket is used to help support large blinds. It is mounted to the ceiling or wall to support the middle of the headrail.
View 1
View 2
Hold down bracket
Hold down brackets are mounted to the door or wall and attach to the window covering. They are used to secure the bottom of the covering.
Valance Clip
Horizontal blind tilter mechanism
View 1
View 2
Tilter mechanism
Vertical Blinds
View 1
View 2
Large mounting bracket
Vertical blinds headrail for the "outside mount" have an L-shaped piece that mounts to the wall with a small flange that attaches to the blind headrail. Inside mount only requires the flange to be sent. Because of the light weight of the blind and the easy sliding motion there is not a lot of stress put on the mounting hardware. The small flange is mounted directly into the ceiling or top of the window sill to mount the vertical blinds.
View 1
View 2
Small Mounting bracket
Vertical blinds headrail for the "outside mount" have an L-shaped piece that mounts to the wall with a small flange that attaches to the blind headrail. Inside mount only requires the flange to be sent. Because of the light weight of the blind and the easy sliding motion there is not a lot of stress put on the mounting hardware. The small flange is mounted directly into the ceiling or top of the window sill to mount the vertical blinds.
Honeycomb Shades
View 1
View 2
Mounting bracket
To install mounting brackets for your honeycomb shades, screw the bracket to the wall through the back holes for an outside mount. If you want an inside mount, simply use the holes on the top.
After the mounting brackets are in place, it’s time to install the headrail. First, tilt the headrail. Then, press the back of the headrail into the brackets and snap it into place.
Mounting bracket for cordless and continuous cord loop
View 1
View 2
Spring roller shade inside mounting bracket
The inside mounting brackets for roller shades should be screwed into the wall with the easy-mount-slide-in-slot bracket is on the left. To securely mount the brackets, use two screws per side. Insert your shade in by sliding it in and down.
Outside/ceiling mount brackets can be secured with 2 screws. They have holes on the sides and top so you can choose where to mount.
View 1
View 2
Spring roller mechanism
The roller shade spring mechanism consists of two pieces, both of which are concealed unless your shades are taken apart.
The spring side raises and lowers the shade. The fixed side works to hold the spring in place when you adjust the height of your blinds.
SelectBlinds Canada does not sell individual parts; however, if you need a part replaced and bought your roller shades with us, we will you send you a replacement part.
Roller shade mounting bracket
Chain and cord roller mounting bracket
Roller shade chain and cord mechanism
Roller shade chain and cord hold down
A cord hold down is used to secure continuous cord loops, such as on roller and bamboo shades. It prevents the cord from dangling, and makes them more child-safe.
View 1
View 2
Ceiling Mounting bracket
Bamboo / Woven Wood Shades
View 1
View 2
Mounting bracket
View 1
View 2
Ceiling Mounting bracket
